[:de]Kubus von M10 Industries AG besteht auf Anhieb 72-Stunden-Stresstest[:en]M10 Industries AG’s Kubus passes 72-hour stress test on the first attempt[:]

[:de]Kubus von M10 Industries AG besteht auf Anhieb 72-Stunden-Stresstest[:en]M10 Industries AG’s Kubus passes 72-hour stress test on the first attempt[:]

[:de]

Hochleistungs-Stringer Kubus produziert im 24-Stunden-Betrieb in Indien

Erfolgreiche Maschinenabnahme und -übergabe bei PV-Hersteller Emmvee

Die zwei ersten Hochleistungs-Tabber-Stringer der M10 Industries AG mit Sitz in Freiburg im Breigau haben die Abnahme (Site Acceptance Test) beim indischen Modulhersteller Emmvee erfolgreich bestanden. Mit den beiden Tabber-Stringern kann das in Bangalore ansässige Photovoltaik-Unternehmen seine Jahreskapazität um 340 Megawatt erweitern. Der im letzten Jahr mit dem Intersolar Award ausgezeichnete Tabber-Stringer Kubus MTS 5000 ist weltweit die einzige Lötmaschine, die eine unterbrechungsfreie Produktion mit einem Durchsatz von 5.000 Zellen pro Stunde liefert.

„Unser Stringer Kubus kann endlich zeigen, was in ihm steckt: Die versprochene Leistung von 5.000 Zellen pro Stunde haben wir erreicht und die gemessene Anlagenverfügbarkeit liegt im 72-Stunden-Dauer-Stresstest bei netto 98 Prozent“, betont Gregor Reddemann, Geschäftsführer der M10 Industries AG. „Vergleichbare Stringer erreichen hier mit circa 85 Prozent tatsächlicher Produktionszeit deutlich weniger.“ Zudem erwies sich der „Yield“ größer als 99,85 Prozent. Er beschreibt alle produzierten Einheiten im Verhältnis zu den defekten Einheiten. Auch die gemessene Zellbruchrate war mit 0,014 Prozent minimal. „Emmvee war immer Vorreiter für neueste Produktionstechnologie. Die Investition in zwei Kubus Stringer mit modernster Löttechnik hilft uns, neue Maßstäbe in der Modulproduktion zu setzen“, bestätigt Emmvee-Firmenchef Manjunatha D.V.. Damit kann Emmvee ihre Großserien-Produktionslinie eigenständig mit der deutschen Spitzentechnologie von M10 fortführen.

Kapazitätserweiterung auf gleicher Fläche

Zunächst hat das Unternehmen geplant, die Produktionserweiterung in einer neuen Fabrikhalle umzusetzen. Dann kam die Maschinenbau-Firma M10 im Jahr 2015 mit ihrem Hochleistungs-Stringer Kubus auf den Markt. „Der neue Kubus Stringer hat den höchsten Zelldurchsatz bei geringstem Platzbedarf. Damit war es uns möglich, unsere Kapazitätserhöhung im bestehenden Gebäude umzusetzen“, berichtet Srinath T., Technischer Direktor der Emmvee-Gruppe. Die Firma Emmvee ist der erste Kunde in Indien, der die neue Lötmaschine Kubus eingesetzt hat. Die Inbetriebnahme der beiden Tabber-Stringer konnte im Oktober vergangenen Jahres abgeschlossen werden. Nach umfangreicher Schulung von Personal für einen Drei-Schicht-Betrieb auf beiden Anlagen, Materialzertifizierung sowie Produktion und Entwicklung unterschiedlichster Modul- und Materialtypen konnten die beiden Stringer Mitte Januar 2017 final übergeben werden.

Ausführliche Praxistests im M10-eigenen Technologie- und Service Center

Vor der endgültigen Entscheidung hat Emmvee das schnelle Lötsystem aus-führlich und mit unterschiedlichen Materialien getestet – und zwar im Technologie- und Service Center der SI Module GmbH am Freiburger Firmensitz M10 Solar Campus. „Es ist uns sehr wichtig, mit geprüften und in der Praxis bewährten Materialien zu arbeiten – hier entwickeln wir unser Prozess-Knowhow weiter“, erklärt Günter Schneidereit, Geschäftsführer der M10 Industries, die Geschäftsphilosophie. „Dadurch können wir kundenspezifische Produktionsmaterialien bereits im Vorfeld testen, bevor wir die Maschine bei unseren Kunden in Betrieb nehmen“, ergänzt Reddemann. Das ist sinnvoll und spart Kosten, da die Hochleistungsmaschinen zu 90 Prozent in den weltweiten Export gehen. Die Firma Emmvee kann zufrieden sein. Für sie hat sich der Mut ausgezahlt, in Kubus zu investieren. Die Qualität ihrer Produkte ist erstklassig und die Her-stellkosten haben sich deutlich reduziert. Damit ist Emmvee sehr gut für die Zukunft gerüstet. Weitere Informationen unter www.m10ag.de.

Über die M10 Industries AG Gruppe:

Das Kompetenzzentrum „M10 Solar Campus“, bestehend aus den Firmen SI Module und M10 AG, vereint die Bereiche Entwicklung, Produktion und Technologie: Die M10 Industries AG entwickelt und fertigt Systeme für die Solarindustrie, die sich durch Innovation, Qualität und höchste Leistungsfähigkeit auszeichnen. Die SI Module GmbH produziert hochwertige Photovoltaikmodule. Als Tochterunternehmen von M10 Industries dient SI Module auch als Technologie- und Servicezentrum für den neuen Hochleistungs-Tabber-Stringer Kubus. Alle Produkte der Unternehmensgruppe werden ausschließlich in Deutschland hergestellt.

Kontakt:

Amely Reddemann
Corporate Communication
M10 Industries AG
Munzinger Straße 10
79111 Freiburg | Deutschland
Telefon: +49 761 4019 68-0
Fax: +49 761 4019 68-19
a.reddemann@m10ag.de
www.m10ag.de

Bianca Böttcher
PR-Agentur Solar Consulting
Emmy-Noether-Str. 2
79110 Freiburg
Telefon: +49 761 3809 6820
Fax: +49 761 3809 68
Boettcher@solar-consulting.de
www.solar-consulting.de[:en]

High-performance stringer Kubus performs well in 24-hour operation in India

Successful machine acceptance and delivery to PV manufacturer Emmvee

The first two high-performance tabber stringers made by M10 Industries AG, based in Freiburg im Breisgau, have successfully passed Indian module manufacturer Emmvee’s site acceptance test. These two tabber stringers will enable the Bangalore based photovoltaic company to increase its annual capacity by 340 megawatts. The Kubus MTS 5000 stringer, winner of the Intersolar Award last year, is the only soldering machine in the world that can deliver uninterrupted production with a flow rate of 5,000 cells an hour.

“Our Kubus stringer can finally show what it is really made of. We achieved the promised 5,000 cells per hour and the system availability during the 72-hour stress test was measured at 98 percent,” emphasizes Gregor Reddemann, CEO of M10 Industries AG. “Similar stringers achieve significantly less with around 85 percent actual production time.” Furthermore, the yield proved to be more than 99.85 percent. This is the number of defective units in relation to the total number of units produced. The measured cell breakage rate was also very low at 0.014 percent. “Emmvee has always been in the forefront in adapting new technology. The acquisition of the Kubus stringer with latest soldering technology will help us to achieve greater heights in solar module production”, explains Manjunatha D. V., Managing Director and Founder of the Emmvee Group. Emmvee can independently continue with their high-volume production line with this cutting-edge, German technology from M10.

Increased capacity in the same amount of space

Initially the company had planned to increase their production by moving to a new factory. But then, in 2015, engineering company M10 brought out Kubus, its high-performance tabber stringer. “The new Kubus stringer which can sol-der high volume solar cells in a smaller foot print has helped us to expand our capacity in the existing facility,” says Srinath T., Emmvee Group’s technical di-rector. Emmvee is the first customer in India to use the new Kubus soldering machine. The two tabber stringers were commissioned in October last year. After extensive personnel training for a three-shift operation on both systems, material certification and the production and development of differ-ent module and material types, the two stringers finally started production in the middle of January 2017.

Extensive field tests in M10’s own technology and service center

Before making their final decision, Emmvee tested the fast soldering system extensively and with various different materials at SI Module GmbH’s technology and service center on the M10 Solar Campus at company headquarters in Freiburg. Günter Schneidereit, CEO and Co-Founder of M10 Industries, explains the company philosophy, “It is very important to us to work with materials that have been tested and that are actually used in practice – that’s how we develop our knowledge.” Reddemann adds, “This enables us to test customer specific production materials in advance, before we take the machine to our customer’s production facility.” This makes sense and saves money, as 90 percent of the high-performance machines will be exported across the world. Emmvee are very satisfied. The chance they took in investing in Kubus tabber stringer has paid off. The products they produce are top quality and their manufacturing costs have significantly reduced. Emmvee is well equipped for the future. For more information visit www.m10ag.de.

About the M10 Industries AG Group:

The “M10 Solar Campus” competence center is home to the joint develop-ment, production and technology departments for companies SI Module and M10 AG. M10 Industries AG develops and manufactures innovative, high-quality and high-performance systems for the solar industry. SI Module GmbH produces high-grade photovoltaic modules. As a subsidiary of M10 Industries, SI Module acts as a technology and service center for Kubus, the new high-performance tabber stringer. All of the Group’s products are manufactured exclusively in Germany.

Contact:

Corporate Communication
M10 Industries AG
Munzinger Straße 10
79111 Freiburg | Germany
Telephone: +49 761 4019 68-0
Fax: +49 761 4019 68-19
a.reddemann@m10ag.de
www.m10ag.de

Bianca Böttcher
Solar Consulting GmbH
Emmy-Noether-Str. 2
79110 Freiburg
Telephone: +49 761 3809 6820
Fax: +49 761 3809 68
Boettcher@solar-consulting.de
www.solar-consulting.de

[:]

Haben wir Ihr Interesse geweckt?

Solar Consulting GmbH
Emmy-Noether-Straße 2
79110 Freiburg im Breisgau

Fon +49 761 380968-0
info@solar-consulting.de

Ihr direkter Weg zu uns: